All items sold here are NEW from boxes, unless otherwise specified.
To obtain a reseller price list, about bulk volume discounts and any other enquiries, please send email to:.

*** Note to all customers ***
Please provide us your detailed contact information when sending emails to us. We will NOT reply to anonymous emails.

Payment Instructions
We are a member of Paypal World Seller Scheme. We use PayPal to process orders. You do not need to have, or open, a PayPal account. You can pay us by credit cards or PayPal accounts. We prefer payments by Paypal and you'll be protected by a more secure payment gateway system.

MT PS2 Adapter
A small adapter board used to decode SONY PS2 game controller signals into standard RS232 or MT Protocol.
Standard kit includes assembled MT-PS2, connecting cables and a jumper.

SONY is a registered trademark of SONY Corporation.

MT 21 Channels Servo Sequencer
1. Parallel output mode
2. Independent servo operation
3. Individual servo speed control (8s to move through 180 degrees, slowest)
4. Selectable baudrate from 600 to 19200
5. Command to retrieve servo position
6. Control up to 21 servos
7. 24 sets of position memory storage for servo speeds and positions
8. Simple commands to operate
9. Small board size 65x41mm
10. 5K bytes memory for up to 256 sequences data storage
11. Integrated with Infra-Red commands

MT 13 Channels Servo Sequencer
1. Parallel output mode
2. Independent servo operation
3. Individual servo speed control (10s to move through 180 degrees, slowest)
4. Selectable baudrate from 600 to 19200
5. Command to retrieve servo position
6. Control up to 13 servos
7. 38 sets of position memory storage for servo speeds and positions
8. Simple commands to operate
9. Small board size 46x38mm
10. 5K bytes memory for up to 256 sequences data storage
11. Integrated with Infra-Red commands

MT RB-20 RoboBoard, Single Board Computer system
Fitted with MT-20 chip
128 run-time memory units (256 bytes)
Stores 1 x 1K words TinyC programs
LEDs for Power, IR detection and Program Load indicator
5 sets of pins for power supply for external gadgets
12 sets of jumper I/O pins for externalconnection, including 3 for MT Serial LCD Controller
MAX232 IC for RS232 serial communication
L293D for driving 2 small DC motors
A speacker for sound generation
A 38 KHz Infra-red detector/receiver
Buttons for system reset and program download
3 uni-directional male connectors for power and DC motors
Board size of 63mm x 59mm
Standard kit includes full kits or assembled RB-20, software, PC-download cable, battery cable, heatsinks and a bundle of connecting leads. Battery not included

Geared DC motor hosted in a servo-like case
Uni-directional female connector for power. The male counterpart is shown in RB-20 RoboBoard.
3V-6V DC power supply
Speed of rotation can be controlled by PWM. See RoboBoard for demonstration.
Wheel diameter of 47mm, including the rubber tyre
Best companion for RoboBoard.
Standard package includes assembled motor in servo-like case and one wheel only. The other wheel shown in the photo just to illustrate how the other side of the wheel looks like.

MT 21 Channels Servo Controller
1. Parallel output mode
2. Independent servo operation
3. Individual servo speed control (8s to move through 180 degrees, slowest)
4. Selectable baudrate from 600 to 19200
5. Command to retrieve servo position
6. Control up to 21 servos
7. 24 sets of position memory storage for servo speeds and positions
8. Simple commands to operate
9. Small board size 65x41mm

MT 13 Channels Servo Controller
1. Parallel output mode
2. Independent servo operation
3. Individual servo speed control (10s to move through 180 degrees, slowest)
4. Selectable baudrate from 600 to 19200
5. Command to retrieve servo position
6. Control up to 13 servos
7. 19 sets of position memory storage for servo speeds and positions
8. Simple commands to operate
9. Small board size 46x38mm

MT 13 Channels Servo Controller (High Resolution)
1. Parallel output mode
2. Independent servo operation
3. Individual servo speed control (18s to move through 180 degrees, slowest)
4. Fixed baudrate at 9600
5. Command to retrieve servo position
6. Control up to 13 servos
7. 6 sets of position memory storage for servo speeds and positions
8. Simple commands to operate
9. Small board size 46x38mm

MT ARMBoard, 60MHz
Fitted with Philips LPC2132 ARM chip
64K Flash, 16K RAM, 2xUART,8xADC (10bits), DAC, RTC,...

When used as MT chip:
7000 run-time memory units (14000 bytes)
Stores 1 x 16K words TinyC programs

Standard kit includes assembled ARM-1 and PC-download cable

MT USB ARMBoard, 48MHz
Fitted with Philips LPC2142 ARM chip
64K Flash, 16K RAM, USB, 2xUART,8xADC (10bits), DAC, RTC,...

When used as MT chip:
7000 run-time memory units (14000 bytes)
2 Extra USB COM ports
Stores 1 x 16K words TinyC programs

Standard kit includes assembled ARM-2 and PC-download cable

MT IOBoard
For doing I/O experiments with MT DemoBoards/ARMBoards
Fitted with 7805 5V voltage regulator + heatsink, 4 x 7-Segment digits, 8 x LEDs, 8 x Switches, Speaker, Infra-Red detector, MAX232 communication IC
Standard kit includes assembled IO-1 and connecting cables

7.4V 1300mAh Li-ion Polymer rechargeable battery
Norminal voltage value of 8.4V when fully charged

MT Motor Controller
2 sets of L298N motor controller ICs
Controls up to 2 stepping motors or 4 DC motors
Standard kit includes assembled MCTRL-1 and heatsinks

MT Serial LCD Controller
Attached to the back of any HD44780 compatible LCD module units
Standard kit includes assembled LCDCTRL-1, connecting cables and jumpers

16x2 alphanumeric back-lit LCD module
Standard HD44780 LCD module

MT-40 DemoBoard
Fitted with MT-40 chip
32 i/o ports
RS232 serial circuit
7805 voltage regulator
512 run-time memory units (1024 bytes)
1x4K + 4x1K words TinyC programs
Standard kit includes assembled MT-40-b1, PC-download cable and battery power cable. Battery not included
Note: This DemoBoard is not suitable for MT-40-AD chip, but the rest of 40-pin version of MT chips are OK

MT-28 DemoBoard
Fitted with MT-28 chip
23 i/o ports
8x10bits ADC
RS232 serial circuit
7805 voltage regulator
128 run-time memory units (256 bytes)
1x1K words TinyC program
Standard kit includes assembled MT-28-b1, PC-download cable and battery power cable. Battery not included

MT-20 DemoBoard
Fitted with MT-20 chip
15 i/o ports
8x10bits ADC
RS232 serial circuit
7805 voltage regulator
128 run-time memory units (256 bytes)
1x1K words TinyC program
Standard kit includes assembled MT-20-b1, PC-download cable and battery power cable. Battery not included

MT-40-XX chip, supplied with 22.1184MHz crystal
32 i/o ports
896 run-time memory units (1792 bytes)
1x16K+1x6K words TinyC programs

MT-40-XP chip, supplied with 22.1184MHz crystal
32 i/o ports
896 run-time memory units (1792 bytes)
3x8K words TinyC programs

MT-40-XA chip, supplied with 22.1184MHz crystal
32 i/o ports
896 run-time memory units (1792 bytes)
5x4K words TinyC programs

MT-40-XT chip, supplied with 22.1184MHz crystal
32 i/o ports
512 run-time memory units (1024 bytes)
1x8K words TinyC program

MT-40 chip, supplied with 22.1184MHz crystal
32 i/o ports
512 run-time memory units (1024 bytes)
1x4K + 4x1K words TinyC programs

MT-40-AD chip, supplied with 11.0592MHz crystal
32 i/o ports, 8x10bits ADC
860 run-time memory units (1720 bytes)
1x512 words TinyC program
Note: Not suitable for MT-40 DemoBoard

MT-28 chip, supplied with 22.1184MHz crystal
23 i/o ports
8x10bits ADC
128 run-time memory units (256 bytes)
1x1K words TinyC program

MT-20 chip, supplied with 22.1184MHz crystal
15 i/o ports
8x10bits ADC
128 run-time memory units (256 bytes)
1x1K words TinyC program

MT-14 chip
12 i/o ports
8x10bits ADC
128 run-time memory units (256 bytes)
1x256 words TinyC program

MT-08 chip
6 i/o ports
4x10bits ADC
128 run-time memory units (256 bytes)
1x256 words TinyC program

8051 Emulator and Debugger IC
Using the latest Atmel High Performance Microcontroller as Keil IDE emulator and debugger.
This chip is able to simulate almost all the 8051 derivatives available nowaday. Just plug it into the IC socket of your board, connect a serial RS232 link, then you have a very powerful debugging system.
This chip is a great working partner for 51SBC, 8051 Single Board Computer System

HC49U (low profile) 11.0592MHz Crystal

HC49U (low profile) 22.1184MHz Crystal